Lab Scale Polymeric Filtration

Product parameters:
♦ Minimum circulation volume: 0.8L;
♦ Material tank: 5L/10L with jacket for hot and cold water;
♦ Working pressure: 0-6.5MPa;
♦ Allowable working temperature: 5-55℃;
♦ Pump power: 1500W;
♦ pH range: 2-12;
♦ Filtration rate: 0.5--10L/H;
♦ Cleaning temperature: 30~55℃;
♦ Power supply: AC/220V;
♦ Equipment size: 900 (length) × 500 (width) × 625 (height) mm;

Introduction:
1. The equipment has an automatic overpressure protection function, and the overpressure automatically stops; ensuring the safety of the use process;
2. With temperature protection function, high temperature automatically stops, and low temperature automatically starts;
3. With temperature control module, over-temperature automatically stops to ensure the stability of materials during the experiment; high and low temperature alarms can be set, and automatic start and stop;
4. Other models of microfiltration, ultrafiltration, nanofiltration membranes, and reverse osmosis membrane elements can be replaced;
5. The equipment is equipped with pressure and temperature sensors, and the digital display screen displays pressure and temperature;
6. All stainless steel welding adopts automatic argon filling protection, single-sided welding, double-sided molding, and there are no welding points on the pipeline in contact with the material to ensure the pressure resistance and corrosion resistance of the equipment;
7. The inner and outer surfaces of the equipment pipeline are of excellent quality, simple operation, clean and hygienic, safe and reliable;
8. The power supply of the equipment adopts frequency conversion control, which can fully ensure the safety of equipment and personnel;
9. Membrane element: imported membrane element is used, and the membrane element model is configured: the membrane element is configured according to the filtration requirements. The membrane element complies with the US FDA, USDA, and 3-A sanitary standards;
10. The membrane shell can ensure the membrane surface flow rate according to fluid dynamics, ensure the safety of the experiment and the reliability and stability of the test data;
11. The flow range of the pump is configured in full accordance with the membrane surface flow rate of the sanitary membrane element, which can ensure that the experimental parameters selected by the equipment can be directly put into industrial production;
12. The thickened membrane shell design can be replaced with microfiltration membranes, ultrafiltration membranes, nanofiltration membranes and other membrane cores, which is suitable for small-scale separation experiment research.

Basic configuration:
One feed pump (imported), one SUS316L stainless steel membrane assembly, one set of pressure sensors, one set of temperature sensors, one set of material tanks, one pressure regulating valve, equipment bracket, chain clamps, pipelines and their connectors, one set of overpressure automatic protection system, one set of overtemperature automatic protection system, one set of frequency conversion control system, and one membrane element.

Typical application areas:
1. Pharmaceuticals (desalting and concentrating antibiotic resin analytical solution, vitamin concentration)
2. Dyes (desalting and concentrating, replacing salting out and acid precipitation) amino acids (decolorization, impurity removal, concentration, desalting)
3. Foods (oligosaccharides, starch sugar separation and purification, fruit juice concentration and separation, plant extraction)
4. Mother liquor recovery (MSG mother liquor impurity removal, glucose crystallization mother liquor impurity removal, etc.)
5. Extracts (clarification and filtration of animal and plant extracts)
6. Traditional Chinese medicine (clarification and filtration of traditional Chinese medicine extracts)
7. Condiments (sterilization, clarification and filtration of soy sauce, vinegar, etc.)